#Saab tis2000 software and dongle key how to
#Saab tis2000 software and dongle key cracked
#Saab tis2000 software and dongle key install
#Saab tis2000 software and dongle key 64 Bit
#Saab tis2000 software and dongle key serial

On вЂSelect Diagnostic Tool and Programming ProcessвЂ™ (picture below) screen make the desired selection forДў) the reprogramming of an ECU that was not exchanged or the replacement/programming of a new ECU

Select the application вЂService Programming SystemвЂ™ on the TIS 2000 start page.Д¤.

To register the hardware key select вЂHardware Key RegistrationвЂ™ in the menu вЂConfigurationвЂ™. Hardware keys that have already been registered are still valid! Note: The hardware key (HWK) has to be registered prior to working with вЂService Programming SystemвЂ™.В To register a hardware key, the form that is enclosed with the hardware key kit has to be filled in and sent to the address at the top.В In case the form is missing, the document is also in the TIS 2000 newsletter (see icon in the TIS 2000 tool bar).В At first, the user receives a temporary code until the key is registered on the next TIS 2000 CD. If you need to program Saab ECU, you had to use Saab TIS2000 and USB dongle. TIS2000 will not work on 2007 up GM, and software must work together with TIS2000 USB key.

#Saab tis2000 software and dongle key install

Some more install info, especially for VMвЂ™s, is also available in this thread from SaabCentral.Here is the step-by-step instruction on programming GM (General Motors) ECUs with Tech2 scanner and SPS (Service Programming System) application in TIS2000.Д«efore using the SPS, make sure that the Tech 2 scan tool and the pc contain the latest software, the battery of the vehicle is fully charged, only the ignition is on power, and all cables are connected properly. Whatever you do, DO NOT USE THE вЂњSOFTWARE DOWNLOADвЂќ BUTTON! This will retrograde the card in your Tech2 to an old version from 2008.

#Saab tis2000 software and dongle key how to

Follow the read me file for instructions on how to use it. Before you can use Tis2000 with your Tech2 scanner, you have to make it вЂњthinkвЂќ that there is a dongle connected that authorizes it.

#Saab tis2000 software and dongle key serial

If you have a serial port on the computer, itвЂ™s probably COM 1 or use the one from the USB adapter.Д¤. During the install, it will ask you to specify the COM port. Install the Tis2000 software from the CD included with the Tech II scan tool. Go into вЂњDevice ManagerвЂќ and make note of the COM port used by the adapter.ДЈ. If youвЂ™re using a USB to serial adapter, plug it in now and set it up. Installed ALL the required drivers until there were no more yellow check marks in Device Manager.ДЈ. Install and use Windows XP Mode in Windows 7Дў.

Here is the detail instruction on using VMware: allows you to make a complete backup image of your hard drive, and allows you to flash it back to that drive at any time. If youвЂ™re gonna be writing to the main drive on your computer, I suggest first creating a bootable USB with Clonezilla on it and creating a drive backup with that Select Windows XP Pro, then continue installing TIS2000 software. When the computer reboots, it will ask you what OS you would like to run.

#Saab tis2000 software and dongle key cracked

Install Virtualbox (free software) and run the cracked Windows copy via a virtual machineвЂ¦ The method I took to test this was to create a separate partition on my ssd and install it there. I didnвЂ™t bother with updating anything else as far as security updates to Windows or install a virus scan because this computer will never be connected to the Internet or used for anything else.

Installed a fresh copy of Windows XP SP3.

And if you do Saab models, do you special Saab TIS2000. Keep in mind that you should have some computer knowledge and know how to install Windows. The challenge of communicating from the virtual environment through the real computerвЂ™s hardware ports can make it difficult but can be done.

VMware is free to use and it has been done from what I read but could be a fairly involved process because of the serial port issue, especially when using a USB to serial adapter. The possible solution would be to use a virtual environment on a host computer. If you have Windows 32bit laptop, the video will help to well install tis2000. ThatвЂ™s why many people fail to get it worked on other operating system Vista Win 7/Win 8/Win 8.1 etc.

#Saab tis2000 software and dongle key 64 Bit

It appears that the issue is that the TIS2000 software has 16 bit setup files and cannot run by default on any 64 bit system. The Tech 2 communicates with the computer using a serial port on the computer running Windows XP SP3. You are able to install TIS2000 software of GM Tech2 diagnostic scanner natively on any Windows pro 32-bit operating system.